Outils pour utilisateurs
back2root:ibm-pc-ms-dos:instr:ret
Ceci est une ancienne révision du document !
RET-RETF-RETN
RET/RETF - Return From Procedure
Transfers control from a procedure back to the instruction address saved on the stack.
“n bytes” is an optional number of bytes to release.
Far returns pop the IP followed by the CS, while near returns pop only the IP register.
Usage:
RET nBytes ; RETF nBytes ; RETN nBytes ;
Modifies flags:
none
| Clocks | Size | |||||
|---|---|---|---|---|---|---|
| Operands | 808x | 286 | 386 | 486 | Bytes | |
| none | 10/14 | 3 | 4 | 4 | 1 | |
| none (PM) | - | - | 4 | 3 | 1 | |
| reg,reg | 3 | 2 | 2 | 1 | 2 | |
| mem,reg | 16+EA | 7 | 7 | 3 | 2-4 | (W88=24+EA) |
| reg,mem | 9+EA | 7 | 6 | 1 | 2-4 | (W88=13+EA) |
| reg,immed | 4 | 3 | 2 | 1 | 3-4 | |
| mem,immed | 17+EA | 7 | 7 | 3 | 3-6 | (W88=23+EA) |
| accum,immed | 4 | 3 | 2 | 1 | 2-3 | |
back2root/ibm-pc-ms-dos/instr/ret.1677924950.txt.gz · Dernière modification : 2023/03/04 11:15 de frater
Outils de la page
Sauf mention contraire, le contenu de ce wiki est placé sous les termes de la licence suivante : CC Attribution-Noncommercial-Share Alike 4.0 International
