Différences

Ci-dessous, les différences entre deux révisions de la page.

--- back2root:ibm-pc-ms-dos:interrupts:old:ms_interrupt_list-51-60 [2023/01/05 04:01] – supprimée - modification externe (Unknown date) 127.0.0.1
+++ back2root:ibm-pc-ms-dos:interrupts:old:ms_interrupt_list-51-60 [2023/01/05 04:01] (Version actuelle) – créée - modification externe 127.0.0.1
@@ Ligne 1: / Ligne 1: @@
+====== MSDOS - Interrupt List 51h-60h ======
+===== INT 51 ======
+==== INT 51 - through 53 - IRQ1-IRQ3 relocated by DESQview ====
+Note:	this is the default location for older versions; see INT 50"DESQview"
+	  for details of interrupt relocation
+SeeAlso: INT 50"DESQview",INT 54"DESQview",INT 58"DESQview"
+==== INT 51 - through 53 - IRQ1-IRQ3 relocated by IBM 3278 emulation control program ====
+SeeAlso: INT 50"IBM 3278",INT 54"IBM 3278"
+==== INT 51 - through 53 - IRQ1-IRQ3 relocated by OS/2 v1.x ====
+SeeAlso: INT 50"OS/2",INT 54"OS/2"
+==== INT 53 - ??? - API ====
+	BX = function
+h ???
+	    	AX = ???
+		Return: AX = ???
+h ???
+h ???
+h
+	    	AX = ???
+		DX = ???
+h
+Return: ???
+Notes:	the installation check consists of looking for the signature "WEBCO"
+	  immediately prior to the interrupt handler
+	the above calls are made by Show Partner F/X v3.6 (see INT 10/AH=53h)
+===== INT 54 =====
+==== INT 54 - through 57 - IRQ4-IRQ7 relocated by DESQview ====
+Note:	this is the default location for older versions; see INT 50"DESQview"
+	  for details of interrupt relocation
+SeeAlso: INT 50"DESQview",INT 58"DESQview"
+==== INT 54 - through 57 - IRQ4-IRQ7 relocated by IBM 3278 emulation control program ====
+SeeAlso: INT 51"IBM 3278"
+==== INT 54 - through 57 - IRQ4-IRQ7 relocated by OS/2 v1.x ====
+SeeAlso: INT 51"OS/2"
+===== INT 58 =====
+==== INT 58 - IRQ8 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 70
+==== INT 58 - IRQ0 relocated by DoubleDOS ====
+SeeAlso: INT 08
+===== INT 59 ====:
+==== INT 59 - IRQ9 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 71
+==== INT 59 - IRQ1 relocated by DoubleDOS ====
+SeeAlso: INT 09
+----------59---------------------------------
+==== INT 59 - GSS Computer Graphics Interface (GSS*CGI) ====
+	DS:DX -> block of 5 array pointers
+Return:	CF set on error
+	    AX = error code
+	CF clear if successful
+	    AX = return code
+Note:	INT 59 is the means by which GSS*CGI language bindings communicate with
+	  GSS*CGI device drivers and the GSS*CGI device driver controller.
+	also used by the IBM Graphic Development Toolkit
+===== INT 5A =====
+==== INT 5A - IRQ10 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 72
+==== INT 5A - IRQ2 relocated by DoubleDOS ====
+SeeAlso: INT 0A
+==== INT 5A - Cluster adapter BIOS entry address ====
+	???
+==== INT 5B - IRQ11 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT50"DESQview",INT 73
+===== INT 5B =====
+==== INT 5B - IRQ3 relocated by DoubleDOS ====
+SeeAlso: INT 0B
+==== INT 5B - Used by cluster adapter ====
+==== INT 5B - AT&T Starlan Extended NetBIOS (variable length names) ====
+	ES:BX -> Network Control Block (see below)
+Return: AL = status (see INT 5C)
+SeeAlso: INT 5C
+Format of Network Control Block
+Offset	Size	Description
+h	BYTE	ncb_command (see below)
+h	BYTE	ncb_retcode
+h	BYTE	ncb_lsn
+h	BYTE	ncb_num
+h	DWORD	-> ncb_buffer
+h	WORD	ncb_length
+Ah 16 BYTEs	ncb_callname
+Ah 16 BYTEs	ncb_name
+Ah	BYTE	ncb_rto
+Bh	BYTE	ncb_sto
+Ch	DWORD	-> ncb_post	/* int (far *ncb_post)(); */
+h	BYTE	ncb_lana_num
+h	BYTE	ncb_cmd_cplt
+h	DWORD	-> ncb_vname
+h	BYTE	ncb_vnamelen
+h  9 BYTEs	ncb_reserve
+Note: fields 00h-31h are the same as for a standard NetBIOS NCB (see INT 5C)
+Values for ncb_command field same as for INT 5C, except
+h	send net Break
+==== INT 5B - Microsoft Network Transport Layer Interface ====
+Note:	used by MS-NET for executing network commands
+SeeAlso: INT 5C"NetBIOS"
+==== INT 5B - used by Alloy NTNX ====
+==== INT 5B - ISOLAN Multi Protocol Software ====
+	ES:BX -> Transfer Control Block
+Return: AL - status
+Note:	this software interface allows multiple protocols/software packages
+	  to access a BICC 411x network card
+Format of Transfer Control Block:
+Offset	Type	Description
+h	BYTE	command code
+		B3h Status
+		F2h Activate
+		F3h Deactivate
+		F4h Send Data
+h	BYTE	command identity
+h	BYTE	virtual circuit ID
+h	WORD	buffer length
+h	DWORD	buffer pointer
+h	BYTE	expedited data flag
+Ah	BYTE	cancelable flag
+Bh 16 BYTEs	local network address
+Bh 16 BYTEs	remote network address
+Bh	DWORD	asynchronous notification routine
+h	DWORD	local network number
+h	DWORD	remote network number
+h	BYTE	call timeout
+h	BYTE	not used
+Ah  8 BYTEs	reserved
+h	BYTE	command code extension
+h	WORD	Blue Book MAC type
+===== INT 5C =====
+==== INT 5C - IRQ12 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 74
+==== INT 5C - IRQ4 relocated by DoubleDOS ====
+SeeAlso: INT 0C
+==== INT 5C - NetBIOS INTERFACE ====
+	ES:BX -> network control block (NCB) (see below)
+Return: AL = status
+h successful
+h bad buffer size
+h invalid NETBIOS command
+h timeout
+h receive buffer too small
+h No-ACK command failed
+h bad session number
+h LAN card out of memory
+Ah session closed
+Bh command has been cancelled
+Dh name already exists
+Eh local name table full
+Fh name still in use, can't delete
+h local session table full
+h remote PC not listening
+h bad NCB_NUM field
+h no answer to CALL or no such remote
+h name not in local name table
+h duplicate name
+h bad delete
+h abnormal end
+h name error, multiple identical names in use
+Ah bad packet
+h network card busy
+h too many commands queued
+h bad LAN card number
+h command finished while cancelling
+h command can't be cancelled
+h name defined by another process (OS/2)
+h NetBIOS environment not defined, must issue reset (OS/2)
+h required operating system resources exhausted (OS/2)
+h maximum applications exceeded (OS/2)
+h no SAPs available for NetBIOS (OS/2)
+h requested resources not available (OS/2)
+h Lana System Error
+h Lana Remote Hot Carrier
+h Lana Local Hot Carrier
+h Lana No Carrier Detected
+h unusual network condition
+h-4Fh hardware error
+h adapter malfunction
+	    FFh NetBIOS busy (command pending)
+Note:	Sytek PCnet card uses DMA 3.
+SeeAlso: INT 2A/AH=01h,INT 2A/AH=04h,INT 5B
+Format of Network Control Block:
+Offset	Size	Description
+h	BYTE	command code (see below)
+h	BYTE	return code
+h	BYTE	local session number (LSN)
+h	BYTE	"ncb_num" datagram table entry from ADD NAME
+h	DWORD	-> I/O buffer
+h	WORD	length of data in buffer
+Ah 16 BYTEs	remote system to call
+Ah 16 BYTEs	network name of local machine
+Ah	BYTE	receive timeout in 1/2 seconds
+Bh	BYTE	send timeout in 1/2 seconds
+Ch	DWORD	-> FAR post handler	/* int (far *ncb_post)(); */
+h	BYTE	network adapter number on which to execute command
+h-03h IBM NetBIOS specs
+		F0h-FFh Eicon NABios interface (see also INT 7B"Eicon")
+h	BYTE	command completion code (see returned status above)
+h 14 BYTEs	reserved for network card
+Values for command code field in NCB (or with 80h for non-waiting call):
+h start session with NCB_NAME name (call)
+h listen for call
+h end session with NCB_NAME name (hangup)
+h send data via NCB_LSN
+h receive data from a session
+h receive data from any session
+h send multiple data buffers
+h send unACKed message (datagram)
+h receive datagram
+h send broadcast datagram
+h receive broadcast datagram
+h add name to name table
+h delete name from name table
+h reset adapter card and tables
+h get adapter status (see structure "astatus" below)
+h status of all sessions for name (see structure "sstatus" below)
+h cancel
+h add group name to name table
+h send data and receive data (LAN Manager NETBEUI.DOS)
+h unlink from IBM remote program (no F0h function)
+h send data without ACK
+h send multiple buffers without ACK
+h UngermannBass Register (conflicts with above function)
+h UngermannBass SendNmc
+h UngermannBass Callniu
+h UngermannBass Calladdr
+h UngermannBass Listenaddr
+h UngermannBass SendPkt
+h find name
+h UngermannBass RcvPkt (conflicts with above function)
+h token-ring protocol trace
+h UngermannBass SendAttn (conflicts with above function)
+Ah UngermannBass RcvAttn
+Bh UngermannBass Listenniu
+Ch UngermannBass RcvRaw
+Dh UngermannBass SendNmc2
+Format of structure "name":
+Offset	Size	Description
+h 16 BYTEs "nm_name" symbolic name
+h	BYTE  "nm_num" number associated with name
+h	BYTE  nm_status
+Format of structure "astatus":
+Offset	Size	Description
+h  6 BYTEs as_id
+h	BYTE  as_jumpers
+h	BYTE  as_post
+h	BYTE  as_major
+h	BYTE  as_minor
+Ah	WORD  as_interval
+Ch	WORD  as_crcerr
+Eh	WORD  as_algerr
+h	WORD  as_colerr
+h	WORD  as_abterr
+h	DWORD as_tcount
+h	DWORD as_rcount
+Ch	WORD  as_retran
+Eh	WORD  as_xresrc
+h  8 BYTEs as_res0
+h	WORD  as_ncbfree
+Ah	WORD  as_ncbmax
+Ch	WORD  as_ncbx
+Eh  4 BYTEs as_res1
+h	WORD  as_sespend
+h	WORD  as_msp
+h	WORD  as_sesmax
+h	WORD  as_bufsize
+Ah	WORD  as_names
+Ch 16 name structures	 as_name
+Format of structure "sstatus":
+Offset	Size	Description
+h	BYTE	number of sessions being reported
+h	BYTE	number of sessions with this name
+h	BYTE	number of outstanding receive datagrams
+h	BYTE	number of outstanding ReceiveAnys
+h	var	session structures (see below)
+Format of structure "session":
+Offset	Size	Description
+h	BYTE	local session number
+h	BYTE	state
+h listen pending
+h call pending
+h session established
+h hangup pending
+h hangup done
+h session aborted
+h 16 BYTEs	local name
+h 16 BYTEs	remote name
+h	BYTE	number of outstanding receives
+h	BYTE	number of outstanding sends/chainsends
+==== INT 5C - TOPS INTERFACE ====
+	ES:BX -> Network Control Block
+Note:	TOPS card uses DMA 1, 3 or none.
+==== INT 5C - ATALK.SYS - AppleTalk INTERFACE ====
+	DX:BX -> control block (see below)
+Return: none
+Notes:	this driver can use any interrupt from 5Ch to 70h
+	the signature 'AppleTalk' appears 16 bytes prior to the interrupt
+	  handler; this serves as the installation check
+Format of AppleTalk control block:
+Offset	Size	Description
+h	WORD	command code
+h "AT_INIT"	    initialize the driver
+h "AT_KILL"
+h "AT_GETNETINFO" get current network info incl init status
+h "AT_GETCLOCKTICKS"
+h "AT_STARTTIMER"
+h "AT_RESETTIMER"
+h "AT_CANCELTIMER"
+h "LAP_INSTALL"
+h "LAP_REMOVE"
+h "LAP_WRITE"
+h "LAP_READ"
+h "LAP_CANCEL"
+h "DDP_OPENSOCKET"
+h "DDP_CLOSESOCKET"
+h "DDP_WRITE"
+h "DDP_READ"
+h "DDP_CANCEL"
+h "NBP_REGISTER"
+h "NBP_REMOVE"
+h "NBP_LOOKUP"
+h "NBP_CONFIRM"
+h "NBP_CANCEL"
+h "ZIP_GETZONELIST"
+h "ZIP_GETMYZONE"
+h "ZIP_TAKEDOWN"
+h "ZIP_BRINGUP"
+h "ATP_OPENSOCKET"
+h "ATP_CLOSESOCKET"
+h "ATP_SENDREQUEST"
+h "ATP_GETREQUEST"
+h "ATP_SENDRESPONSE"
+h "ATP_ADDRESPONSE"
+h "ATP_CANCELTRANS"
+h "ATP_CANCELRESPONSE"
+h "ATP_CANCELREQUEST"
+h "ASP_GETPARMS"
+h "ASP_CLOSESESSION"
+h "ASP_CANCEL"
+h "ASP_INIT"
+h "ASP_KILL"
+h "ASP_GETSESSION"
+h "ASP_GETREQUEST"
+h "ASP_CMDREPLY"
+h "ASP_WRTCONTINUE"
+h "ASP_WRTREPLY"
+Ah "ASP_CLOSEREPLY"
+Bh "ASP_NEWSTATUS"
+Ch "ASP_ATTENTION"
+Dh "ASP_GETSTATUS"
+Eh "ASP_OPENSESSION"
+Fh "ASP_COMMAND"
+h "ASP_WRITE"
+h "ASP_GETATTENTION"
+h "PAP_OPEN"
+h "PAP_CLOSE"
+h "PAP_READ"
+h "PAP_WRITE"
+h "PAP_STATUS"
+h "PAP_REGNAME"
+h "PAP_REMNAME"
+h "PAP_INIT"
+h "PAP_NEWSTATUS"
+h "PAP_GETNEXTJOB"
+Ah "PAP_KILL"
+Bh "PAP_CANCEL"
+		or with the following flags
+h start command then return
+h wait for interrupt service to complete
+h	WORD	returned status
+h success (already initialized if func 01h)
+h	DWORD	pointer to completion function
+h	WORD	network number
+Ah	BYTE	node ID
+---if general func (01h,03h), control block continues:
+Bh	BYTE	"inf_abridge"
+Ch	WORD	"inf_config"
+Eh	DWORD	pointer to buffer
+h	WORD	buffer size
+---if DDP function (20h-24h), control block continues:
+Bh	BYTE	"ddp_addr_socket"
+Ch	BYTE	"ddp_socket"
+Dh	BYTE	"ddp_type"
+Eh	DWORD	pointer to buffer
+h	WORD	buffer size
+h	BYTE	"ddp_chksum"
+---if Name Binding Protocol (30h-34h), control block continues:
+Bh	BYTE	"nbp_addr_socket"
+Ch	WORD	"nbp_toget"
+Eh	DWORD	pointer to buffer
+h	WORD	buffer size
+h	BYTE	"nbp_interval"
+h	BYTE	"nbp_retry"
+h	DWORD	"nbp_entptr"
+---if AppleTalk Transaction Protocol (42h), control block continues:
+Bh	BYTE	"atp_addr_socket"
+Ch	WORD	"atp_socket"
+Eh	DWORD	pointer to buffer
+h	WORD	buffer size
+h	BYTE	"atp_interval"
+h	BYTE	"atp_retry"
+h	BYTE	ATP flags
+		bit 5: exactly one transaction
+h	BYTE	"atp_seqbit"
+h	BYTE	transaction ID
+h  4 BYTEs	ATP user bytes
+Dh	BYTE	number of BDS buffers
+Eh	BYTE	number of BDS responses
+Fh	DWORD	pointer to BDS buffers (see below)
+Format of Name Binding Protocol Name-to-Address binding entries for NBP_LOOKUP:
+Offset	Size	Description
+h	WORD	"tup_address_network"
+h	BYTE	"tup_address_notid"
+h	BYTE	"tup_address_socket"
+h	BYTE	"tup_enum"
+h 99 BYTEs	name
+Format of BDS entries:
+Offset	Size	Description
+h	DWORD	pointer to buffer
+h	WORD	size of buffer
+h	WORD	BDS data size
+h  4 BYTEs	"bds_userbytes"
+==== INT 5C - IBM 802.2 INTERFACE (LLC) ====
+	ES:BX -> CCB
+Return: none
+Format of CCB:
+Offset	Size	Description
+h	BYTE	adapter
+h	BYTE	command code
+h	BYTE	return code
+h	BYTE	work
+h	DWORD	pointer to ???
+h	DWORD	pointer to completion function???
+Ch	DWORD	pointer to parameters???
+==== INT 5C - $25 LAN - INSTALLATION CHECK ====
+Notes:	current versions only check whether the vector is 0000h:0000h or not
+	future versions are supposed to have the signature "NET" in the three
+	  bytes preceding the INT 5C handler
+==== INT 5C - $25 LAN - CHECK IF CONNECTION ALIVE ====
+	AH = 04h
+	AL = COM port (0 = default)
+	CX = wait count in character times (should be at least 100)
+Return: ZF set if link alive
+==== INT 5D - IRQ13 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 75
+==== INT 5D - IRQ5 relocated by DoubleDOS ====
+SeeAlso: INT 0D,INT 5C"DoubleDOS"
+===== INT 5E =====
+==== INT 5E - IRQ14 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 76
+==== INT 5E - IRQ6 relocated by DoubleDOS ====
+SeeAlso: INT 0E,INT 5D"DoubleDOS"
+===== INT 5F =====
+==== INT 5F - IRQ15 relocated by DESQview 2.26+ ====
+Note:	this is the default, but other INTs may be used (see INT 50"DESQview")
+SeeAlso: INT 50"DESQview",INT 77
+==== INT 5F - IRQ7 relocated by DoubleDOS ====
+SeeAlso: INT 0F,INT 5E"DoubleDOS"
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET VIDEO MODE ====
+	AH = 00h
+	AL = video mode
+h text, system manager compliant
+h 240x128 mono graphics, system manager compliant
+h text, not system manager compliant
+	    A0h 240x128 mono graphics, not system manager compliant
+Note:	the defaults after setting the mode to graphics are (0,0) logical
+	  origin, full-screen clip region, (0,0) pen location, pen color 1,
+	  pixel replacement FORCE, line type and fill mask all bits set
+SeeAlso: INT 0F"HP 95LX",INT 10/AH=00h,INT 15/AX=4DD4h
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET FILL MASK ====
+	AH = 01h
+	ES:DI -> 8-byte fill mask
+Note:	the fill mask represents an 8x8 pixel box and is repeated as necessary
+	  when drawing filled rectangles; it is always aligned with the byte
+	  boundaries of video memory, regardless of the actual boundaries of
+	  the rectangle
+SeeAlso: AH=02h
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - GET CURRENT GRAPHICS INFORMATION ====
+	AH = 02h
+	ES:DI -> graphics info record (see below)
+Return: DX:AX -> filled graphics info record (for return to high-level langs)
+Format of graphics info record:
+Offset	Size	Description
+h	BYTE	current video mode
+h	BYTE	default video mode
+h	WORD	display width in pixels
+h	WORD	display height in pixels
+h	WORD	current pen column
+h	WORD	current pen row
+Ah	WORD	current line type
+Ch	WORD	current replacement rule
+Eh	WORD	current pen color
+h	WORD	current leftmost column of clip region
+h	WORD	current rightmost column of clip region
+h	WORD	current topmost row of clip region
+h	WORD	current bottommost row of clip region
+h	WORD	current column of logical origin
+Ah	WORD	current row of logical origin
+Ch  8 BYTEs	current fill mask
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET LOGICAL ORIGIN ====
+	AH = 03h
+	CX = column
+	DX = row
+SeeAlso: AH=04h
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET CLIP REGION ====
+	AH = 04h
+	CX = left-most column
+	DX = top-most row
+	SI = right-most column
+	DI = bottom-most row
+SeeAlso: AH=03h
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - DRAW RECTANGLE ====
+	AH = 05h
+	AL = fill type
+h outline, using current line type and color
+h solid, using current color
+h pattern, using current fill mask and color
+	DX,CX = row,column of other corner of rectangle
+Note:	the rectangle is drawn starting at the current pen position
+SeeAlso: AH=01h,AH=06h,AH=07h
+==== INT 5F - HP 95LX GRAPHICS PRIMITIVES - DRAW LINE ====
+	AH = 06h
+	DX,CX = row,column of end point
+Note:	the line is drawn starting at the current pen position
+SeeAlso: AH=05h,AH=07h
+----------5F07-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - PLOT POINT
+	AH = 07h
+	DX,CX = row,column of point
+Note:	also sets pen position to the specified point
+SeeAlso: AH=06h,AH=08h,AH=0Ch
+----------5F08-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - MOVE PEN
+	AH = 08h
+	DX,CX = row,column of new pen position
+SeeAlso: AH=07h,AH=09h
+----------5F09-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET PEN COLOR
+	AH = 09h
+	AL = new color (00h = white, 01h = black)
+SeeAlso: AH=08h,AH=0Ah,AH=0Bh
+----------5F0A-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET REPLACEMENT RULE
+	AH = 0Ah
+	AL = new replacement rule
+h force
+h AND
+h OR
+h XOR
+SeeAlso: AH=01h,AH=09h,AH=0Bh
+----------5F0B-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - SET LINE TYPE
+	AH = 0Bh
+	CX = new line type
+Note:	the line type specifies 16 bits which are repeated over and over while
+	  drawing the pixels of a line
+SeeAlso: AH=09h,AH=0Ah
+----------5F0C-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - GET PIXEL
+	AH = 0Ch
+	DX,CX = row,column of pixel to read
+Return: AX = pixel color
+SeeAlso: AH=07h
+----------5F0D-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - GET IMAGE
+	AH = 0Dh
+	DX,CX = row,column of first corner
+	BP,SI = row,column of second corner
+	ES:DI -> image buffer (see below)
+Note:	the specified corners are included in the saved image
+SeeAlso: AH=0Eh
+Format of image buffer:
+Offset	Size	Description
+h	WORD	number of planes (always 01h on HP 95LX)
+h	WORD	number of bits/pixel (always 01h on HP 95LX)
+h	WORD	image width in pixels
+h	WORD	image height in pixels
+h  N BYTEs	image data
+		requires (WIDTH+7)/8 * HEIGHT bytes
+----------5F0E-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - PUT IMAGE
+	AH = 0Eh
+	AL = replacement rule
+	    bit 2: invert image before applying rule
+	    bits 1-0:  00 force
+AND
+OR
+XOR
+	DX,CX = row,column of top left corner
+	ES:DI -> image buffer (see AH=0Dh)
+Note:	if the specified image does not fit completely on the screen, this call
+	  does nothing
+SeeAlso: AH=0Dh
+----------5F0F-------------------------------
+INT 5F - HP 95LX GRAPHICS PRIMITIVES - WRITE TEXT
+	AH = 0Fh
+	AL = rotate flag (if nonzero, rotate 90 degrees counter-clockwise)
+	DX,CX = row,column of first character's top left corner
+	ES:DI -> ASCIZ text
+===== INT 60 - reserved for user interrupt =====
+==== INT 60 - VIRUS - "Zero Bug" - INSTALLATION CHECK ====
+<WRAP round box>
+The "Zero Bug" virus hooks this vector.
+It considers itself installed if  offset 103h of the handler's segment contains the bytes "ZE"
+</WRAP>
+SeeAlso: INT 32,INT 61"SEMTEX"
+==== INT 60 - Adaptec and OMTI controllers - DRIVE 0 DATA ====
+SeeAlso: INT 61"Adaptec",INT 62"Adaptec",INT 63"Adaptec",INT 64"Adaptec"
+<WRAP round box>
+this vector stores the first four bytes of the parameter table for hard disk 0
+these vectors are used by the following Adaptec controllers:
+  * ACB 2370 A/B/C, ACB 2372 A/B/C, ACB 2333 A/B, 2322B-8, 2322B-16
+these vectors are NOT used by the following Adaptec controllers:
+  * ACB 2310, ACB 2312, ACB 2320D, ACB 2322D
+</WRAP>
+==== INT 60 - Atari Portfolio - USER INTERFACE FUNCTIONS ====
+<WRAP round box>
+supplies a number of subfunctions which perform such functions as drawing boxes and menus, and provide input line editing
+</WRAP>
+SeeAlso: INT 61"Atari"
+==== INT 60 - PC-IPC API ====
+<code>
+	STACK:	DWORD	pointer to parameter block (see below)
+Return: STACK:	unchanged
+</code>
+<WRAP round box>
+PC-IPC is a shareware TSR by Donnelly Software Engineering which allows communication between independent programs
+INT 60 is the default, any interrupt vector may be used by specifying the vector on the commandline
+</WRAP>
+Format of parameter block:
+^  Offset  ^  Size   ^  Description                                                                                                                                  ^
+|  00h     |  WORD   | caller's ID                                                                                                                                   |
+|  02h     |  WORD   | to ID                                                                                                                                         |
+|  04h     |  WORD   | command code (see below)                                                                                                                      |
+|  06h     |  WORD   | returned status\\   * bit 0: unused\\   * bit 1: IPC enabled\\   * bit 2: IPC installed\\   * bit 3: error\\   * bit 4: message(s) available  |
+|  08h     |  WORD   | returned error code (see below)                                                                                                               |
+|  0Ah     |  WORD   | size of data                                                                                                                                  |
+|  0Ch     |  DWORD  | pointer to data buffer                                                                                                                        |
+Values of command code:
+|  01h  |  "IPC_CMND_INQUIRE"  | inquire current status\\ set status field, writes WORD to data buffer containing free message space in bytes, and sets the "size" field to the number of messages waiting                          |
+|  02h  |  "IPC_CMND_ENABLE"   | reenable PC-IPC\\ ignored unless called with the same ID that disabled PC-IPC                                                                                                                      |
+|  03h  |  "IPC_CMND_DISABLE"  | disable PC-IPC                                                                                                                                                                                     |
+|  04h  |  "IPC_CMND_INSTALL"  | reset PC-IPC                                                                                                                                                                                       |
+|  06h  |  "IPC_CMND_RDATA"    | read data\\ returns first message in data buffer, sets "size" to message length and "to ID" field to sender's ID\\ if no messages available, bit 4 of status is cleared and "size" is set to zero  |
+|  07h  |  "IPC_CMND_SDATA"    | send data                                                                                                                                                                                          |
+|  08h  |  "IPC_CMND_REQID"    | require user ID\\ create a new recognized ID and return in "caller's ID" field                                                                                                                     |
+|  09h  |  "IPC_CMND_DELID"    | cancel user ID\\ delete caller's ID from pool of recognized IDs                                                                                                                                    |
+|  0Ah  |  "IPC_CMND_RDATAW"   | read data, wait if no messages available                                                                                                                                                           |
+|  0Bh  |  "IPC_CMND_VERS"     | get PC-IPC version\\ string representing version returned in data buffer, "size" field set to length of string                                                                                     |
+Values for error code:
+|  00h  | no error                              |
+|  01h  | invalid command or parameter          |
+|  02h  | only process 0 can install/reset IPC  |
+|  03h  | process can not install/reset IPC     |
+|  04h  | IPC is not enabled                    |
+|  05h  | process can not disable IPC           |
+|  06h  | invalid destination process ID        |
+|  07h  | invalid sending process ID            |
+|  08h  | invalid data destination              |
+|  09h  | no more process IDs available         |
+|  0Ah  | can not relinquish that process ID    |
+|  0Bh  | message space is full                 |
+|  0Ch  | IPC is not installed                  |
+==== INT 60 - Tangram Arbiter - API ====
+Notes:	Arbiter may use any interrupt from 60h to 66h (parameterized)
+	identified by string "@ARB_API" immediately following a short jump at
+	  the interrupt handler address
+	Arbiter makes a PC disk look like a slow disk over an SNA link to an
+	  IBM mainframe
+==== INT 60 U - INTRSPY/CMDSPY API ====
+Notes:	INTRSPY will hook the first available interrupt in the range 60h-67h.
+	The installation check is to
+	  a) determine that the handler is an IRET instruction
+	  b) the signature 0Dh "INTRSPY vN.NN" immediately precedes the handler
+	  If INTRSPY is installed, the DWORD immediately after the IRET stores
+	  its entry point.
+	INTRSPY is a script-driven debugger included with the book
+	  _Undocumented_DOS_.
+Call INTRSPY entry point with:
+	AH = function
+h ???
+h set current directory (for use in reporting)
+		ES:DI -> counted string containing directory name (max 79 char)
+h set name of script file
+		ES:DI -> counted string containing file name (max 79 chars)
+h set script arguments
+		ES:DI -> counted string containing arguments (max 79 chars)
+h get directory set with function 01h
+		ES:DI -> 80-byte buffer for directory name
+h get name of script file
+		ES:DI -> 80-byte buffer for script filename
+h get script arguments
+		ES:DI -> 80-byte buffer for script arguments
+h get ???
+		CL = 00h-15h specifies what to get
+		ES:DI -> WORD to be set with desired value on return
+h get ???
+		ES:DI -> WORD to be set with returned value
+h get ???
+		ES:DI -> WORD to be set with returned value
+Bh store code for interrupt handler???
+		ES:DI -> data
+		CX = number of bytes
+Ch ???
+		ES:DI -> ???
+Dh get ???
+		ES:DI -> BYTE to be set with returned value
+Eh set ??? flag
+Fh clear ??? flag
+h ???
+		Return: AL = 04h or 05h if failed
+h ???
+		Return: AL = 05h if failed
+h get ???
+		ES:DI -> buffer
+		Return: CX = number of bytes returned in buffer
+h ???
+Return: AH = 00h
+	AL = status
+h successful
+h invalid function
+h ???
+h ???
+h ???
+h ???
+INT 60 U - PC/370 v4.2 - ???
+	???
+Return: ???
+Notes:	PC/370 is an IBM 370 emulator by Donald S. Higgins
+	this is the default interrupt, however the documentation includes
+	  instructions for patching the system for another interrupt
+SeeAlso: INT 2F/AX=7F24h,INT DC"PC/370"
+==== INT 60 - JPI TopSPEED Modula-2 v1 - PROCEDURE ENTRY TRAP ====
+SeeAlso: INT 61"JPI"
+==== INT 60 - FTP Packet Driver - PC/TCP Packet Driver Specification ====
+<WRAP round box 80%>
+The handler for the interrupt will start with a 3-byte jump instruction, followed by the ASCIZ string "PKT DRVR" (the terminating NUL is significant).
+To find the interrupt being used by the driver, an application should scan through interrupt vectors 60h to 80h (20h through FFh for v1.10+ of the specification) until it finds one with the "PKT DRVR" string.
+AH values of 80h to FFh have been reserved for user-defined additions.
+</WRAP>
+==== INT 60 u - HP 95LX System Manager - WAIT FOR EVENT ====
+	DI = 0100h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to event record (see below)
+Return: event record filled
+	STACK unchanged
+Note:	this call will timeout after about 500ms
+SeeAlso: INT 15/AX=4DD4h,INT 60/DI=0101h,INT 61"HP 95LX",INT 62"HP 95LX"
+Format of event record:
+Offset	Size	Description
+h	WORD	event type
+h no events
+h keystroke available
+h Ctrl-Break
+h reactivation (always follows deactivation event)
+h about to deactivate (sleep)
+			next get-event call will not return until reactivated
+h forced application termination
+h 1-2-3 bridge service request (only given to  1-2-3)
+h request to grow
+h request to shrink
+h application's alarm expired
+Ah daily chance to set an alarm
+Bh system date or time has been changed
+h	WORD	ASCII code page 850 translation of keystroke
+ 		or grow/shrink amount in paragraphs or 0000h if error
+ 		or alarm expiration data
+h	BYTE	scan code from BIOS
+h	BYTE	shift key states at time keystroke is retrieved
+h	WORD	LICS translation of keystroke
+h	BYTE	function key number (1-2-3 only)
+h	DWORD	pointer to 1-2-3 bridge record (see INT 60/DI=0104h)
+ 		or pointer to time change structure (see below)
+Note:	if the System Manager is waiting the conclusion of a bridge service
+	  or grow/shrink call and the event type field is set to FFFFh on
+	  entry, the SysMgr will resume
+Format of time change structure:
+Offset	Size	Description
+h	WORD	old year
+h	BYTE	old month
+h	BYTE	old date
+h	BYTE	old day
+h	BYTE	old hour
+h	BYTE	old minute
+h	BYTE	old second
+h	BYTE	old hundredth of a second
+h  9 BYTEs	new time in same format as old time
+----------60----DI0101-----------------------
+INT 60 u - HP 95LX System Manager - CHECK FOR EVENT
+	DI = 0101h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD pointer to event record (INT 60/DI=0100h)
+Return: event record filled
+	STACK unchanged
+Note:	this call returns immediately if no event is available
+SeeAlso: INT 60/DI=0100h
+----------60----DI0102-----------------------
+INT 60 u - HP 95LX System Manager - "SH_STATUS"
+	DI = 0102h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI0104-----------------------
+INT 60 u - HP 95LX System Manager - LOTUS 1-2-3 BRIDGE SERVICES
+	DI = 0104h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD pointer to bridge record (see below)
+Return: ???
+	STACK unchanged
+Format of bridge record:
+Offset	Size	Description
+h	WORD	function code
+h test
+h get range
+h "GETRANGE_ADDR"
+h "SETRANGE_ADDR"
+h "GETRANGE_DATA"
+h "SETRANGE_DATA"
+h recalculate
+h get cursor
+h set cursor
+h redisplay
+Ah cell type
+Bh "CALCTYPE"
+h	WORD	return code from 1-2-3
+h 16 BYTEs	ASCII range name
+h	WORD	start column of range
+h	WORD	start row of range
+h	WORD	end column of range
+Ah	WORD	end row of range
+Ch	WORD	order in which data is placed in buffer
+Eh	WORD	buffer size
+h	WORD	offset within bridge record's segment of buffer for cell data
+----------60----DI0105-----------------------
+INT 60 u - HP 95LX System Manager - FLUSH KEYBOARD BUFFER
+	DI = 0105h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+==== INT 60 u - HP 95LX System Manager - YIELD CPU ====
+	DI = 0106h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=1000h,INT 2F/AX=1680h
+==== INT 60 u - HP 95LX System Manager - "NO_FINI" - REFUSE TERMINATION REQUEST ====
+	DI = 0107h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+==== INT 60 u - HP 95LX System Manager - SETUP MENU ====
+	DI = 0200h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to menu data (see below)
+		DWORD	pointer to ???
+		WORD	number of items on menu???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 60/DI=0201h,INT 60/DI=0203h,INT 60/DI=0205h
+Format of menu data:
+Offset	Size	Description
+h 80 BYTEs	first line of menu text
+h 80 BYTEs	second line of menu text
+ A0h 80 BYTEs	third line of menu text
+ F0h	WORD	number of keywords
+ F2h	WORD	index of currently highlighted keyword or FFFFh
+ F4h	WORD	single prompt on top line if nonzero
+ F6h 20 BYTEs	which line each of 20 keywords is located on
+Ah 20 BYTEs	offset of each of 20 keywords within its line
+Eh 20 BYTEs	length of each of 20 keywords
+h 20 BYTEs	first letter of each of 20 keywords
+h 20 WORDs	offsets of long prompts for each of 20 keywords
+----------60----DI0201-----------------------
+==== INT 60 u - HP 95LX System Manager - DISPLAY OR REDISPLAY MENU ====
+	DI = 0201h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to menu data (see INT 60/DI=0200h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0200h,INT 60/DI=0202h,INT 60/DI=0206h
+----------60----DI0202-----------------------
+==== INT 60 u - HP 95LX System Manager - "MENU_ON" - ENABLE PROCESSING OF MENU ====
+	DI = 0202h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to menu data (see INT 60/DI=0200h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0200h,INT 60/DI=0201h,INT 60/DI=0203h
+----------60----DI0203-----------------------
+==== INT 60 u - HP 95LX System Manager - REMOVE MENU ====
+	DI = 0203h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to menu data (see INT 60/DI=0200h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0201h,INT 60/DI=0202h,INT 60/DI=0204h,INT 60/DI=0208h
+==== INT 60 u - HP 95LX System Manager - LET SYSTEM MANAGER HANDLE MENU KEYSTROKE ====
+	DI = 0204h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to menu data (see INT 60/DI=0200h)
+		WORD	keystroke
+		DWORD	pointer to WORD to receive selection number
+Return: buffer for selection number filled with index of selected menu item or
+	  FFFFh if no final selection yet
+	STACK unchanged
+SeeAlso: INT 60/DI=0200h,INT 60/DI=0202h,INT 60/DI=0207h
+==== INT 60 u - HP 95LX System Manager - INITIALIZE FILE SELECTION MENU ====
+	DI = 0205h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file menu structure (see below)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+		DWORD	pointer to wildcard filespec for initial file list
+		WORD	row???
+		WORD	column???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0200h,INT 60/DI=0206h,INT 60/DI=0208h
+Format of file menu structure:
+Offset	Size	Description
+h	DWORD	pointer to ASCIZ base directory name
+h	DWORD	pointer to ASCIZ file pattern (wildcard filespec)
+h	DWORD	pointer to file list workspace, at least 1024 bytes (see below)
+Ch	WORD	size of file list workspace in bytes
+Eh	WORD	starting row (-3 is topmost, 0 is first non-"reserved" line)
+h	WORD	starting column
+h	WORD	number of lines
+h	WORD	number of columns
+h	WORD	number of files displayed on each line
+---the remaining fields are initialized by the System Manager---
+h	WORD	0000h if first edit character, else multiline
+Ah	WORD	number of files in file list
+Ch	WORD	max files workspace has room for
+Eh	WORD	file at top of list
+h	WORD	index of file to highlight
+h	WORD	index of file to unhighlight
+h	WORD	current focus (01h FMENU, 02h EDIT)
+Format of file list workspace entry:
+Offset	Size	Description
+h	BYTE	file attributes
+h	WORD	file time (see INT 21/AX=5700h)
+h	WORD	file date (see INT 21/AX=5700h)
+h	DWORD	file size
+h 13 BYTEs	ASCIZ filename
+==== INT 60 u - HP 95LX System Manager - DISPLAY/REDISPLAY FILE SELECTION MENU ====
+	DI = 0206h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file menu structure (see INT 60/DI=0205h)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0205h
+==== INT 60 u - HP 95LX System Manager - LET SYSMGR PROCESS FILE SEL MENU KEYSTROKE ====
+	DI = 0207h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file menu structure (see INT 60/DI=0205h)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+		WORD	keystroke
+Return: AX = status
+h keystroke processed, call INT 60/DI=0206h to refresh menu
+h redisplay application area before refreshing menu
+h user confirmed selection, filename is in edit record's buffer
+h user aborted menu
+	    FFFBh bad filename
+	    FFFCh bad directory
+	    FFFDh bad drive
+	    FFFEh unknown keystroke
+	    FFFFh keystroke known but invalid in current context
+	STACK unchanged
+SeeAlso: INT 60/DI=0205h,INT 60/DI=0208h
+==== INT 60 u - HP 95LX System Manager - REMOVE FILE SELECTION MENU ====
+	DI = 0208h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file menu structure (see INT 60/DI=0205h)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 60/DI=0205h,INT 60/DI=0206h
+==== INT 60 u - HP 95LX System Manager - DISPLAY STRING ====
+	DI = 0300h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	starting row (-3 is topmost, 0 is first user line)
+		WORD	starting column
+		DWORD	pointer to string
+		WORD	length of string
+		WORD	display style: 0000h normal, 0001h reverse video
+		WORD	"OSTYLE"
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0F03h,INT 60/DI=1005h
+==== INT 60 u - HP 95LX System Manager - CLEAR PORTION OF SCREEN ====
+	DI = 0301h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	starting row (-3 is topmost, 0 is first user line)
+		WORD	starting column
+		WORD	number of rows
+		WORD	number of columns
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0302h,INT 60/DI=1005h
+==== INT 60 u - HP 95LX System Manager - SCROLL PORTION OF SCREEN ====
+	DI = 0302h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	starting row???
+		WORD	starting column???
+		WORD	height of scroll region???
+		WORD	width of scroll region???
+		WORD	number of lines to scroll region???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0301h
+==== INT 60 u - HP 95LX System Manager - SCREEN SERVICE "M_XCHG" ====
+	DI = 0303h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+==== INT 60 u - HP 95LX System Manager - SCREEN SERVICE "M_CHRATTR" ====
+	DI = 0304h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+==== INT 60 u - HP 95LX System Manager - SCREEN SERVICE "M_CHRRVRT" ====
+	DI = 0305h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+==== INT 60 u - HP 95LX System Manager - SCREEN SERVICE "M_CHRINV" ====
+	DI = 0307h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+==== INT 60 u - HP 95LX System Manager - SCREEN SERVICE "M_ROWS_COLS" ====
+	DI = 0308h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI0309-----------------------
+INT 60 u - HP 95LX System Manager - SET SCREEN (VIDEO???) MODE
+	DI = 0309h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	new mode
+Return: ???
+	STACK unchanged
+----------60----DI030A-----------------------
+INT 60 u - HP 95LX System Manager - GET SCREEN (VIDEO???) MODE
+	DI = 030Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI030B-----------------------
+INT 60 u - HP 95LX System Manager - SET CURSOR POSITION
+	DI = 030Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	row (-3 is topmost, 0 is first non-reserved line)
+		WORD	column
+Return: ???
+	STACK unchanged
+Note:	cursor is hidden if the specified position is not on the physical
+	  display
+SeeAlso: INT 10/AH=02h,INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI0400-----------------------
+INT 60 u - HP 95LX System Manager - "EDIT_INIT"
+	DI = 0400h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to edit record (see below)
+		DWORD	pointer to string to be edited
+		WORD	initial length of string being edited
+		WORD	maximum length of edited string
+		WORD	row of edit field
+		WORD	leftmost column of edit field
+Return: ???
+	STACK unchanged
+Format of edit record:
+Offset	Size	Description
+h	WORD	current length of edit buffer
+h	BYTE	flag for special processing on first character
+h	BYTE	flags
+ 		bit 0: tab handling
+h	WORD	editing in prompt window?
+h	DWORD	pointer to top line of prompt window message
+Ah	WORD	length of top line of prompt
+Ch	DWORD	pointer to second line of prompt window message
+h	WORD	length of second line of prompt
+h 80 BYTEs	workspace for editing
+h  2 WORDs	line array needed for multi-line editing
+h 36 BYTEs	multi-line edit record (see below)
+Ah	WORD	displayable columns
+Format of multi-line edit record:
+Offset	Size	Description
+h	DWORD	pointer to user-supplied edit buffer
+h	WORD	length of edit buffer
+h	WORD	current cursor position
+h	WORD	starting row of edit area (-3 is topmost, 0 is first user line)
+Ah	WORD	starting column of edit area
+Ch	WORD	height of edit area
+Eh	WORD	width of edit area
+h	WORD	current top row (-3 is topmost, 0 is first user line)
+h	WORD	number of rows displayable
+h	BYTE	cursor column
+h	BYTE	01h if buffer has been modified
+h	BYTE	first displayable column (ticker fields only)
+h	BYTE	01h if wordwrap enabled, FFh if ticker field
+h	DWORD	pointer to array of line starts (at least one bigger than edit
+ 		  area is high)
+Ch	BYTE	currently marking?
+Dh	BYTE	flag
+Eh	WORD	offset of mark start
+h	WORD	offset of mark end (inclusive)
+h	WORD	displayable columns
+----------60----DI0401-----------------------
+INT 60 u - HP 95LX System Manager - EDIT ON TOP LINE
+	DI = 0401h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+		DWORD	pointer to string to edit
+		WORD	initial length of string being edited
+		WORD	maximum length of edited string
+		DWORD	pointer to first line of prompt
+		WORD	length of first line
+		DWORD	pointer to second line of prompt
+		WORD	length of second line
+Return: ???
+	STACK unchanged
+----------60----DI0402-----------------------
+INT 60 u - HP 95LX System Manager - DISPLAY OR REDISPLAY EDIT FIELD
+	DI = 0402h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+Return: ???
+	STACK unchanged
+----------60----DI0403-----------------------
+INT 60 u - HP 95LX System Manager - LET SYSTEM MANAGER PROCESS EDITING KEYSTROK
+	DI = 0403h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to edit record (see INT 60/DI=0400h)
+		WORD	keystroke
+		DWORD	pointer to WORD buffer for result code
+Return: result code buffer filled with 0001h if editing complete
+	STACK unchanged
+----------60----DI0404-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_INI"
+	DI = 0404h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0405-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_DIS"
+	DI = 0405h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0406-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_KEY"
+	DI = 0406h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0407-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_FIL"
+	DI = 0407h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0408-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_MARK"
+	DI = 0408h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0409-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_UNMARK"
+	DI = 0409h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI040A-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_CUTMARK"
+	DI = 040Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI040B-----------------------
+INT 60 u - HP 95LX System Manager - "MDIT_INS_STR"
+	DI = 040Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI0500-----------------------
+INT 60 u - HP 95LX System Manager - OPEN FILE
+	DI = 0500h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see below)
+		DWORD	pointer to filename
+		WORD	length of filename
+		WORD	???
+		WORD	suppress buffering if nonzero
+Return: AX = status
+	STACK unchanged
+SeeAlso: INT 60/DI=0501h,INT 60/DI=0502h,INT 60/DI=0508h
+Format of file state record:
+Offset	Size	Description
+h	WORD	DOS file handle
+h	WORD	flags
+ 		bit 0: buffer contents valid
+		bit 1: buffer is dirty and must be written
+		bit 2: unbuffered I/O
+		bit 3: file is a character device
+h	DWORD	current DOS physical file offset (FFFFFFFFh if unknown)
+h	DWORD	DOS file offset of start of buffer
+Ch	DWORD	effective file offset as seen by caller
+h	WORD	number of bytes in file buffer
+---buffered I/O only---
+h 512 BYTEs	file buffer
+----------60----DI0501-----------------------
+INT 60 u - HP 95LX System Manager - OPEN FILE IN READ-ONLY MODE
+	DI = 0501h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		DWORD	pointer to filename
+		WORD	length of filename
+		WORD	???
+		WORD	suppress buffering if nonzero
+Return: AX = status
+	STACK unchanged
+SeeAlso: INT 60/DI=0500h
+----------60----DI0502-----------------------
+INT 60 u - HP 95LX System Manager - CREATE NEW FILE
+	DI = 0502h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		DWORD	pointer to filename
+		WORD	length of filename
+		WORD	???
+		WORD	suppress buffering if nonzero
+Return: AX = status
+	STACK unchanged
+SeeAlso: INT 60/DI=0500h,INT 60/DI=0503h
+----------60----DI0503-----------------------
+INT 60 u - HP 95LX System Manager - CREATE OR TRUNCATE FILE
+	DI = 0503h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		DWORD	pointer to filename
+		WORD	length of filename
+		WORD	???
+		WORD	suppress buffering if nonzero
+Return: AX = status
+	STACK unchanged
+SeeAlso: INT 60/DI=0502h
+----------60----DI0504-----------------------
+INT 60 u - HP 95LX System Manager - READ FROM FILE
+	DI = 0504h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		DWORD	pointer to data buffer
+		WORD	number of bytes to read
+		DWORD	pointer to WORD in which to return actual bytes read
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0505h
+----------60----DI0505-----------------------
+INT 60 - HP 95LX System Manager - WRITE TO FILE
+	DI = 0505h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		DWORD	pointer to data
+		WORD	length of data
+Return: AX = status
+	STACK unchanged
+SeeAlso: INT 60/DI=0504h
+----------60----DI0506-----------------------
+INT 60 u - HP 95LX System Manager - SET FILE POSITION
+	DI = 0506h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0507h
+----------60----DI0507-----------------------
+INT 60 u - HP 95LX System Manager - GET FILE POSITION
+	DI = 0507h "M_TELL"
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+		DWORD	pointer to DWORD buffer for file position???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0506h
+----------60----DI0508-----------------------
+INT 60 u - HP 95LX System Manager - CLOSE FILE
+	DI = 0508h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to file state record (see INT 60/DI=0500h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0500h
+----------60----DI0509-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_SETPAT"
+	DI = 0509h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI050A-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_MATCH"
+	DI = 050Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+Format of pattern match control block:
+Offset	Size	Description
+h 43 BYTEs	FindFirst data block (see INT 21/AH=4Eh)
+Bh 80 BYTEs	full path name
+Bh	BYTE	offset of last component of filename
+Ch	BYTE	DOS function number (4Eh or 4Fh)
+----------60----DI050B-----------------------
+INT 60 u - HP 95LX System Manager - IDENTIFY FILENAME REFERENT
+	DI = 050Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+Values returned:
+h nonexistent
+h file
+h directory
+h character device
+----------60----DI050C-----------------------
+INT 60 u - HP 95LX System Manager - DELETE FILE
+	DI = 050Ch "M_DELETE"
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI050D-----------------------
+INT 60 u - HP 95LX System Manager - RENAME FILE
+	DI = 050Dh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI050E-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_GETDIR"
+	DI = 050Eh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI050F-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_SETDIR"
+	DI = 050Fh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0510-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_VOLUME"
+	DI = 0510h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0511-----------------------
+INT 60 u - HP 95LX System Manager - MAKE A SUBDIRECTORY
+	DI = 0511h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0512-----------------------
+INT 60 u - HP 95LX System Manager - REMOVE A SUBDIRECTORY
+	DI = 0512h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0513-----------------------
+INT 60 u - HP 95LX System Manager - GET DEFAULT DRIVE
+	DI = 0513h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ??? buffer for current drive
+Return: ???
+	STACK unchanged
+----------60----DI0514-----------------------
+INT 60 u - HP 95LX System Manager - SET DEFAULT DRIVE
+	DI = 0514h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	new drive
+Return: ???
+	STACK unchanged
+----------60----DI0515-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_FDATE"
+	DI = 0515h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0516-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_GET_SYSDIR"
+	DI = 0516h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0517-----------------------
+INT 60 u - HP 95LX System Manager - GET FILE ATTRIBUTES
+	DI = 0517h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ??? buffer for file's attributes???
+Return: ???
+	STACK unchanged
+----------60----DI0518-----------------------
+INT 60 u - HP 95LX System Manager - SET FILE ATTRIBUTES
+	DI = 0518h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		WORD	new attributes???
+Return: ???
+	STACK unchanged
+----------60----DI0519-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_COMMON_OPEN"
+	DI = 0519h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		WORD	???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI051A-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_COPYDT"
+	DI = 051Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI051B-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_GETFDT"
+	DI = 051Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI051C-----------------------
+INT 60 u - HP 95LX System Manager - FILE SERVICE "M_PUTFDT"
+	DI = 051Ch
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0600-----------------------
+INT 60 u - HP 95LX System Manager - PROCESS INITIALIZING
+	DI = 0600h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 60/DI=0601h,INT 61"HP 95LX"
+----------60----DI0601-----------------------
+INT 60 u - HP 95LX System Manager - PROCESS TERMINATION
+	DI = 0601h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: never
+	STACK unchanged
+SeeAlso: INT 21/AH=4Ch,INT 60/DI=0600h
+----------60----DI0602-----------------------
+INT 60 u - HP 95LX System Manager - "M_LOCK" - PREVENT TASK SWITCHES
+	DI = 0602h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=101Bh,INT 60/DI=0603h
+----------60----DI0603-----------------------
+INT 60 u - HP 95LX System Manager - "M_UNLOCK" - ALLOW TASK SWITCHES
+	DI = 0603h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=101Ch,INT 60/DI=0602h
+----------60----DI0604-----------------------
+INT 60 u - HP 95LX System Manager - "M_SPAWN"
+	DI = 0604h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0605-----------------------
+INT 60 u - HP 95LX System Manager - "M_APPCOUNT"
+	DI = 0605h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI0606-----------------------
+INT 60 u - HP 95LX System Manager - "M_REBOOT"
+	DI = 0606h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI0607-----------------------
+INT 60 u - HP 95LX System Manager - "M_SPAWNARG"
+	DI = 0607h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0608-----------------------
+INT 60 u - HP 95LX System Manager - "M_REG_APP_NAME"
+	DI = 0608h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0609-----------------------
+INT 60 u - HP 95LX System Manager - "M_APP_NAME"
+	DI = 0609h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: DX:AX -> ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI0700-----------------------
+INT 60 u - HP 95LX System Manager - OPEN CLIPBOARD
+	DI = 0700h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0701h,INT 60/DI=0702h
+Values for error code:
+h	successful
+ FFF8h transfer request out of bounds
+ FFF9h no such representation
+ FFFAh no representation open
+ FFFBh a representation is already open
+ FFFCh representation already exists
+ FFFDh heap allocation failure
+ FFFEh clipboard not open
+ FFFFh clipboard access denied
+----------60----DI0701-----------------------
+INT 60 u - HP 95LX System Manager - CLOSE CLIPBOARD
+	DI = 0701h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0700h,INT 60/DI=0702h
+----------60----DI0702-----------------------
+INT 60 u - HP 95LX System Manager - RESET CLIPBOARD
+	DI = 0702h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0700h
+----------60----DI0704-----------------------
+INT 60 u - HP 95LX System Manager - "M_NEW_REP" - START A NEW REPRESENTATION???
+	DI = 0704h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0705h,INT 60/DI=0706h,INT 60/DI=0707h
+----------60----DI0705-----------------------
+INT 60 u - HP 95LX System Manager - CLIPBOARD SERVICE "M_FINI_REP"
+	DI = 0705h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0704h
+----------60----DI0706-----------------------
+INT 60 u - HP 95LX System Manager - CLIPBOARD SERVICE "M_REP_NAME"
+	DI = 0706h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0704h,INT 60/DI=0707h
+----------60----DI0707-----------------------
+INT 60 u - HP 95LX System Manager - CLIPBOARD SERVICE "M_REP_INDEX"
+	DI = 0707h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0704h,INT 60/DI=0706h
+----------60----DI0708-----------------------
+INT 60 u - HP 95LX System Manager - WRITE TO CLIPBOARD
+	DI = 0708h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to data to be written???
+		WORD	length of data???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0709h
+----------60----DI0709-----------------------
+INT 60 u - HP 95LX System Manager - READ FROM CLIPBOARD
+	DI = 0709h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+		DWORD	pointer to buffer for data???
+		WORD	length of buffer???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0708h
+----------60----DI0800-----------------------
+INT 60 u - HP 95LX System Manager - BEEP
+	DI = 0800h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0801h,INT 60/DI=0802h,INT 60/DI=0803h
+----------60----DI0801-----------------------
+INT 60 u - HP 95LX System Manager - SOUND SERVICE "M_THUD"
+	DI = 0801h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0800h,INT 60/DI=0802h,INT 60/DI=0803h
+----------60----DI0802-----------------------
+INT 60 u - HP 95LX System Manager - MAKE A SOUND PATTERN
+	DI = 0802h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	pattern number (00h-06h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0800h,INT 60/DI=0801h,INT 60/DI=0803h
+----------60----DI0803-----------------------
+INT 60 u - HP 95LX System Manager - TURN OFF SOUND
+	DI = 0803h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0800h,INT 60/DI=0801h,INT 60/DI=0802h
+----------60----DI0900-----------------------
+INT 60 - HP 95LX System Manager - ALLOCATE REGULAR MEMORY BLOCK
+	DI = 0900h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	size of block in bytes
+Return: AX -> memory block
+	STACK unchanged
+Note:	System Manager-compliant applications are always small-model (64K code,
+K data)
+SeeAlso: INT 15/AX=4DD4h,INT 60/DI=0902h,INT 60/DI=0903h
+----------60----DI0902-----------------------
+INT 60 u - HP 95LX System Manager - FREE REGULAR MEMORY BLOCK
+	DI = 0902h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	offset of memory block???
+Return: ???
+	STACK unchanged
+Note:	System Manager-compliant applications are always small-model (64K code,
+K data)
+SeeAlso: INT 60/DI=0900h,INT 60/DI=0904h
+----------60----DI0903-----------------------
+INT 60 u - HP 95LX System Manager - ALLOCATE LARGE MEMORY BLOCK
+	DI = 0903h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	size of block in bytes???
+Return: AX -> memory block???
+	STACK unchanged
+SeeAlso: INT 60/DI=0900h,INT 60/DI=0904h
+----------60----DI0904-----------------------
+INT 60 u - HP 95LX System Manager - FREE LARGE MEMORY BLOCK
+	DI = 0904h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	segment of memory block???
+Return: AX -> ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0902h,INT 60/DI=0903h
+----------60----DI0B00-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_DTINFO"
+	DI = 0B00h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B01-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_GETDTM"
+	DI = 0B01h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B02-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_SETDTM"
+	DI = 0B02h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B03-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_XALARM"
+	DI = 0B03h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0B04-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_ALARM"
+	DI = 0B04h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to alarm record???
+		WORD	???
+Return: ???
+	STACK unchanged
+Format of alarm record:
+Offset	Size	Description
+h	BYTE	hour
+h	BYTE	minute
+h	BYTE	second
+h	BYTE	unused padding
+h	WORD	rescheduling interval, in seconds
+h	BYTE	are seconds significant?
+h	BYTE	alarm sound
+h 40 BYTEs	message displayed when alarm activates
+h	BYTE	task ID of owner
+h	BYTE	application's own use for sub-class
+h  4 BYTEs	application's own use for private data
+----------60----DI0B05-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_START_SW"
+	DI = 0B05h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B06-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_GET_SW"
+	DI = 0B06h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B07-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_STOP_SW"
+	DI = 0B07h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B08-----------------------
+INT 60 u - HP 95LX System Manager - "M_TELLTIME" - DISPLAY TIMESTAMP
+	DI = 0B08h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	timestamp format
+			bits 1-0:
+date only
+time only
+date and time
+day and date
+			bit 4: supply am/pm
+			bit 5: supply seconds
+			bit 6: show year
+			bit 7: four-digit year
+		WORD	row (-3 is topmost, 0 is first non-reserved line)
+		WORD	column
+Return: ???
+	STACK unchanged
+----------60----DI0B09-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_GET_SETTINGS"
+	DI = 0B09h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B0Ah,INT 60/DI=0B0Fh
+Format of system settings:
+Offset	Size	Description
+h	WORD	country code
+h	WORD	speaker volume (00h-03h or FFh for off)
+h	WORD	contrast level (00h-0Fh)
+h	WORD	week start (00h Sunday, 01h Monday)
+h	WORD	punctuation format
+ 		code	decimal	arg	thousands
+h	.	,	,
+h	,	.	.
+h	.	;	;
+h	,	;	.
+h	.	,	" "
+h	,	.	" "
+h	.	;	" "
+h	,	;	" "
+Ah	WORD	two-character language code (only 5355h = "US" byte-swapped)
+Ch	WORD	current date format
+h dd-mmm-yy
+h dd-mmm
+h mmm-yy
+h mm/dd/yy
+h dd/mm/yy
+h dd.mm.yy
+h yy-mm-dd
+h mm/dd
+h dd/mm
+h dd.mm
+Ah mm-dd
+Eh	WORD	current time format
+h HH:MM:SS am/pm
+h HH:MM am/pm
+h HH:MM:SS
+h HH.MM.SS
+h HH,MM,SS
+h HHhMMmSSs
+h HH:MM
+h HH.MM
+h HH,MM
+h HHhMMm
+h	WORD	collating sequence
+h numbers first, 01h letters first, 02h ASCII
+h 80 BYTEs	name of picture file
+h 30 BYTEs	name
+h 30 BYTEs	title
+Eh 28 BYTEs	company name
+ BAh	WORD	number of languages
+ BCh  6 BYTEs	available languages
+ C2h 66 BYTEs	language menu
+h  2 BYTEs	ASCIZ date separator
+h  2 BYTEs	ASCIZ time separator
+h	BYTE	date order
+h	BYTE	use 24 hour time?
+Ah 16 BYTEs	currency string
+Ah	WORD	currency string position (00h prefix, 01h suffix)
+Ch	WORD	keyboard (see below)
+Eh	WORD	printer baud rate
+h 300, 01h 1200, 02h 2400, 03h 4800, 04h 9600, 05h 19200
+h	WORD	printer driver code
+h Epson FX80, 01h HP Laserjet, 02h IBM ProPrinter
+h	WORD	printer interface (00h COM1, 01h COM2, 02h IR, 03h LPT1)
+h	WORD	system manager interrupt (60h by default)
+h	WORD	code page (01h CP850, 02h CP437)
+h	WORD	active exit key
+Ah	WORD	active menu key
+Ch	WORD	active CHAR key toggle
+Eh  6 BYTEs	alarm
+Values for keyboard:
+h Belgium
+h French Canadian
+h Denmark
+h Finland
+h French
+h Finland
+h Italy
+h Netherlands
+h Norway
+h Portugal
+h Spain
+h Sweden
+h Swiss French
+h Swiss German
+h United Kingdom
+h USA
+----------60----DI0B0A-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_SET_SETTINGS"
+	DI = 0B0Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B09h
+----------60----DI0B0B-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_START_TIMER"
+	DI = 0B0Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B0Ch,INT 60/DI=0B0Dh
+----------60----DI0B0C-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_STOP_TIMER"
+	DI = 0B0Ch
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B0Bh,INT 60/DI=0B0Dh
+----------60----DI0B0D-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_GET_TIMER"
+	DI = 0B0Dh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B0Bh,INT 60/DI=0B0Ch
+----------60----DI0B0E-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_TELL_ANYTIME"
+	DI = 0B0Eh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+		WORD	???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: DX:AX -> ???
+	STACK unchanged
+----------60----DI0B0F-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVCE "M_GET_SETTINGS_ADDR"
+	DI = 0B0Fh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: DX:AX -> system settings record (see INT 60/DI=0B09h)
+	STACK unchanged
+SeeAlso: INT 60/DI=0B09h
+----------60----DI0B10-----------------------
+INT 60 u - HP 95LX System Manager - PARSE DATE SPECIFICATION
+	DI = 0B10h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B11-----------------------
+INT 60 u - HP 95LX System Manager - PARSE TIME SPECIFICATION
+	DI = 0B11h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0B12-----------------------
+INT 60 u - HP 95LX System Manager - SET DATE PARSING RULE
+	DI = 0B12h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	new parsing rule
+h day-month-year
+h month-day-year
+h year-month-day
+h "DMYO"
+h "MDYO"
+			OR with 08h to get any year
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B13h
+----------60----DI0B13-----------------------
+INT 60 u - HP 95LX System Manager - SET TIME PARSING RULE
+	DI = 0B13h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	new parsing rule
+h HH:MM:SS (am/pm)
+h HH:MM:SS (24hr)
+h HHMM:SS (24hr)
+h HH:MM:SS.hh (24hr)
+h HH:MM (am/pm)
+h HH:MM (24hr)
+h HHMM (24hr)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0B12h
+----------60----DI0B14-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_POST_TIME"
+	DI = 0B14h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI0B15-----------------------
+INT 60 u - HP 95LX System Manager - CLOCK/CALENDAR SERVICE "M_DAY_TRIGGER"
+	DI = 0B15h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI0C00-----------------------
+INT 60 u - HP 95LX System Manager - OPEN PRINTER
+	DI = 0C00h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0C01h,INT 60/DI=0C02h,INT 60/DI=0C03h
+----------60----DI0C01-----------------------
+INT 60 u - HP 95LX System Manager - CLOSE PRINTER
+	DI = 0C01h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+Note:	relinquishes control of printer
+SeeAlso: INT 60/DI=0C00h
+----------60----DI0C02-----------------------
+INT 60 u - HP 95LX System Manager - WRITE TO PRINTER
+	DI = 0C02h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to data to be written
+		WORD	length of data
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0C00h
+----------60----DI0C03-----------------------
+INT 60 u - HP 95LX System Manager - INITIALIZE PRINTER
+	DI = 0C03h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0C00h
+----------60----DI0C04-----------------------
+INT 60 u - HP 95LX System Manager - "M_TRANS_PRINTER"
+	DI = 0C04h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0C05-----------------------
+INT 60 u - HP 95LX System Manager - "M_FALL_PRINTER"
+	DI = 0C05h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI0E00-----------------------
+INT 60 u - HP 95LX System Manager - COMMUNICATIONS SERVICE "M_COMM_INIT"
+	DI = 0E00h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E01h,INT 60/DI=0E02h
+Values for error code:
+h	successful
+ FFF1h "E_BUSY"
+ FFF2h timeout
+ FFF3h framing error
+ FFF4h parity error
+ FFF5h overrun error
+ FFF6h "E_EMPTY"
+ FFF7h "E_CONECT"
+ FFF8h not open
+ FFF9h out of memory
+ FFFAh buffer overflow
+ FFFBh "E_NOFIT"
+ FFFCh unsupported
+ FFFDh "E_IVOPR"
+ FFFEh "E_IVCHN"
+ FFFFh "E_REOPEN"
+----------60----DI0E01-----------------------
+INT 60 u - HP 95LX System Manager - OPEN COMMUNICATIONS CHANNEL
+	DI = 0E01h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to WORD buffer for comm channel handle
+		WORD	communications line number (01h-04h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E00h,INT 60/DI=0E02h
+----------60----DI0E02-----------------------
+INT 60 u - HP 95LX System Manager - CLOSE COMMUNICATIONS CHANNEL
+	DI = 0E02h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	comm channel handle
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E00h,INT 60/DI=0E01h
+----------60----DI0E03-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_GETMDM"
+	DI = 0E03h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E04-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_ANSWER"
+	DI = 0E04h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E05-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_DIAL"
+	DI = 0E05h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0E06-----------------------
+INT 60 u - HP 95LX System Manager - RESET COMMUNICATIONS CHANNEL
+	DI = 0E06h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	comm channel handle
+		WORD	reset options
+			bit 0: reset line
+			bit 1: flush transmit buffer
+			bit 2: flush receive buffer
+			bit 3: reset modem
+			bit 4: reset receiver's ^S state
+			bit 5: reset transmitter's ^S state
+Return: ???
+	STACK unchanged
+----------60----DI0E07-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_HANGUP"
+	DI = 0E07h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E08-----------------------
+INT 60 u - HP 95LX System Manager - SEND DATA OVER COMM CHANNEL
+	DI = 0E08h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	comm channel handle
+		DWORD	pointer to data to be sent
+		WORD	option flags
+			bit 0: send partial buffer
+			bit 1: turn on receiver after sending
+		DWORD	pointer to WORD containing length of data to be sent
+Return: length WORD updated to contain number of bytes actually sent???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E09h,INT 60/DI=0E0Bh
+----------60----DI0E09-----------------------
+INT 60 u - HP 95LX System Manager - QUERY COMM CHANNEL TRANSMIT QUEUE
+	DI = 0E09h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ??? WORD
+		DWORD	pointer to ??? WORD
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E0Ah
+----------60----DI0E0A-----------------------
+INT 60 u - HP 95LX System Manager - QUERY COMM CHANNEL RECEIVE QUEUE
+	DI = 0E0Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	comm channel handle
+		DWORD	pointer to WORD to get receive buffer size
+		DWORD	pointer to WORD to get free bytes in receive buffer
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E09h,INT 60/DI=0E0Bh
+----------60----DI0E0B-----------------------
+INT 60 u - HP 95LX System Manager - RECEIVE DATA FROM COMM CHANNEL
+	DI = 0E0Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	comm channel handle
+		DWORD	pointer to data buffer
+		DWORD	pointer to WORD (input) length of data buffer
+					(output) number of bytes received
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E08h,INT 60/DI=0E0Ah
+----------60----DI0E0C-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_HAZCMD"
+	DI = 0E0Ch
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E0D-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_COMAND"
+	DI = 0E0Dh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E0E-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_BREAK"
+	DI = 0E0Eh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E0F-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_FRCXON"
+	DI = 0E0Fh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E10-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_FRCXOF"
+	DI = 0E10h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E11-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_SETDTR"
+	DI = 0E11h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E12-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_XMITNG"
+	DI = 0E12h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E13-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_STATUS"
+	DI = 0E13h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E14-----------------------
+INT 60 u - HP 95LX System Manager - SET COMMUNICATIONS SETTINGS
+	DI = 0E14h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	comm channel handle
+		DWORD	pointer to comm settings (see below)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E15h
+Format of comm settings:
+Offset	Size	Description
+h	BYTE	dial type ('T' tone, 'P' pulse)
+h	WORD	baud rate divisor (115200/baud_rate)
+h	BYTE	parity (00h none, 08h odd, 18h even, 28h mark, 38h space)
+h	BYTE	stop bits (00h one, 04h two)
+h	BYTE	data bits - 5
+h	BYTE	software handshake
+h none, 02h XOFF/XON, 04h XOFF/any, 08h ENQ/ACK
+h	BYTE	infrared (01h off, 02h on)
+h	BYTE	duplex (01h half, 02h full)
+h	BYTE	echo (01h echo, 02h no echo)
+----------60----DI0E15-----------------------
+INT 60 u - HP 95LX System Manager - GET COMMUNICATIONS SETTINGS
+	DI = 0E15h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to buffer for settings (see INT 60/DI=0E14h)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0E14h
+----------60----DI0E16-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_CNFGUR"
+	DI = 0E16h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		WORD	???
+		WORD	???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI0E17-----------------------
+INT 60 u - HP 95LX System Manager - "M_COMM_QRYERR"
+	DI = 0E17h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI0F00-----------------------
+INT 60 u - HP 95LX System Manager - "M_ERRMSG"
+	DI = 0F00h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0F01-----------------------
+INT 60 u - HP 95LX System Manager - DRAW STANDARD TITLE BOX
+	DI = 0F01h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ASCIZ title string
+Return: ???
+	STACK unchanged
+----------60----DI0F02-----------------------
+INT 60 u - HP 95LX System Manager - "SHOWNAME"
+	DI = 0F02h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI0F03-----------------------
+INT 60 u - HP 95LX System Manager - DISPLAY TWO-LINE MESSAGE BOX
+	DI = 0F03h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to first line of message
+		WORD	length of first line
+		DWORD	pointer to second line of message
+		WORD	length of second line
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0300h,INT 60/DI=0F04h,INT 60/DI=0F09h
+----------60----DI0F04-----------------------
+INT 60 u - HP 95LX System Manager - REMOVE MESSAGE BOX
+	DI = 0F04h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0F03h,INT 60/DI=0F09h
+----------60----DI0F05-----------------------
+INT 60 u - HP 95LX System Manager - "M_COM_TIMER_ADDR"
+	DI = 0F05h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: DX:AX -> ???
+	STACK unchanged
+----------60----DI0F06-----------------------
+INT 60 u - HP 95LX System Manager - "M_COM_TIMER_COUNT_ADDR"
+	DI = 0F06h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: DX:AX -> ???
+	STACK unchanged
+----------60----DI0F07-----------------------
+INT 60 u - HP 95LX System Manager - "M_SYS_RSRC_ADDR"
+	DI = 0F07h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: DX:AX -> ???
+	STACK unchanged
+----------60----DI0F08-----------------------
+INT 60 u - HP 95LX System Manager - "M_BIOS_OUTSTR"
+	DI = 0F08h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI0F09-----------------------
+INT 60 u - HP 95LX System Manager - DISPLAY THREE-LINE MESSAGE BOX
+	DI = 0F09h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to first line of message
+		WORD	length of first line
+		DWORD	pointer to second line of message
+		WORD	length of second line
+		DWORD	pointer to third line of message
+		WORD	length of third line
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0F03h,INT 60/DI=0F04h
+----------60----DI0F0A-----------------------
+INT 60 u - HP 95LX System Manager - DISABLE MACROS
+	DI = 0F0Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0F0Bh
+----------60----DI0F0B-----------------------
+INT 60 u - HP 95LX System Manager - ENABLE MACROS
+	DI = 0F0Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 60/DI=0F0Ah
+----------60----DI0F0C-----------------------
+INT 60 u - HP 95LX System Manager - "M_DATE_TIME_SEPS"
+	DI = 0F0Ch
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI0F0D-----------------------
+INT 60 u - HP 95LX System Manager - "M_FORM_FT"
+	DI = 0F0Dh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: DX:AX -> ???
+	STACK unchanged
+----------60----DI0F0E-----------------------
+INT 60 u - HP 95LX System Manager - "M_RAM_IV_INFO"
+	DI = 0F0Eh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: DX:AX -> ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI1005-----------------------
+INT 60 u - HP 95LX System Manager - "M_DIRTY_SYNC" - FORCE SCREEN UPDATE
+	DI = 1005h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+SeeAlso: INT 10/AH=FFh,INT 60/DI=0300h,INT 60/DI=0301h
+----------60----DI1200-----------------------
+INT 60 u - HP 95LX System Manager - RESOURCE SERVICE "MAP_RESOURCE_FILE"
+	DI = 1200h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI1201-----------------------
+INT 60 u - HP 95LX System Manager - "GET_RESOURCE_PTR"
+	DI = 1201h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		WORD	???
+Return: DX:AX -> ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI1202-----------------------
+INT 60 u - HP 95LX System Manager - "GET_RSRC_TAB_PTR"
+	DI = 1202h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: DX:AX -> ???
+	STACK unchanged
+----------60----DI1203-----------------------
+INT 60 u - HP 95LX System Manager - "INIT_SYSGMR_RSRCS"
+	DI = 1203h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: ???
+	STACK unchanged
+----------60----DI1300-----------------------
+INT 60 u - HP 95LX System Manager - INITIALIZE HELP SYSTEM
+	DI = 1300h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI1301-----------------------
+INT 60 u - HP 95LX System Manager - DISPLAY HELP
+	DI = 1301h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+----------60----DI1302-----------------------
+INT 60 u - HP 95LX System Manager - "M_HELP_KEY"
+	DI = 1302h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI1303-----------------------
+INT 60 u - HP 95LX System Manager - "M_HELP_TERM"
+	DI = 1303h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI1400-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColInit"
+	DI = 1400h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+Return: AX = ???
+	STACK unchanged
+----------60----DI1401-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColCpStr"
+	DI = 1401h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI1402-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColLicsStr"
+	DI = 1402h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1403-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColLicsChar"
+	DI = 1403h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1404-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColToLower"
+	DI = 1404h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI1405-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColCpSearch"
+	DI = 1405h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+		DWORD	pointer to ???
+		WORD	???
+		WORD	???
+Return: ???
+	STACK unchanged
+----------60----DI1406-----------------------
+INT 60 u - HP 95LX System Manager - "M_ColToUpper"
+	DI = 1406h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		DWORD	pointer to ???
+		WORD	???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+----------60----DI1500-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispInit"
+	DI = 1500h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1501-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispClear"
+	DI = 1501h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1502-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispDot"
+	DI = 1502h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1503-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispDraw"
+	DI = 1503h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1504-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispFill"
+	DI = 1504h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1505-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispRead"
+	DI = 1505h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1506-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispString"
+	DI = 1506h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1507-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispPan"
+	DI = 1507h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1508-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispZoom"
+	DI = 1508h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI1509-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispSave"
+	DI = 1509h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI150A-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispRestore"
+	DI = 150Ah
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+----------60----DI150B-----------------------
+INT 60 u - HP 95LX System Manager - "GrDispCorner"
+	DI = 150Bh
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+==== INT 60 u - HP 95LX System Manager - "CP_TO_LICS" ====
+	DI = 1604h
+	STACK:	2 WORDs unused dummies (for calls from high level languages)
+		???
+Return: ???
+	STACK unchanged
+SeeAlso: INT 15/AX=4DD4h,INT 61"HP 95LX",INT 62"HP 95LX"
+==== INT 60 - SYS_PROF.EXE - PROFILER STATUS ====
+	AH = 00h
+Return: AX = 0000h    profiling is off
+	    otherwise profiling is on
+Note:	SYS_PROF.EXE is the TSR portion of a profiler from Micro Cornucopia #47
+SeeAlso: AH=01h"SYS_PROF",02h"SYS_PROF"
+==== INT 60 - MDEBUG - GET STATUS ====
+	AH = 00h
+	DS:SI -> password or a null byte
+Return: AX = return code
+	    FFFEh password is invalid
+	    FFFDh display mode is invalid
+	   else successful
+		ES = value of the monitor register SE
+		DI = value of the monitor register OF
+		CH = monitor color
+		CL = interpreter color
+		BH = monitor start line
+		BL = interpreter start line
+		AH = makecode of the hotkey
+		AL = ASCII code of the hotkey
+		DL = status of special keys (only SHIFT, ALT, CTRL) for the
+			hotkey (coded as for the keyboard flag at 0040h:0017h)
+		DH = basic process number for the communication with drivers
+			process number for the display driver, DH+1 = process
+			number for the command driver(s)
+	DS:SI -> MDEBUG identification table
+Notes:	MDEBUG is a shareware memory-resident debugging tool by Bernd Schemmer,
+	  including a memory monitor, an interpreter, and a disassembler
+	MDEBUG uses INT 60 by default, but may be directed to any of INT 60
+	  through INT 67; the interrupt handler is preceded by the signature
+	  "USERINT" and is not chained
+	if DS:SI points at a null byte, MDEBUG will prompt for a password if
+	  passwords are active; enough stack space must be provided for an
+	  INT 10h call (which MDEBUG uses while prompting for the password)
+SeeAlso: AH=02h"MDEBUG"
+Format of MDEBUG identification table:
+Offset	Size	Description
+ -2	WORD	entry offset
+h	WORD	CS of MDEBUG
+h	DWORD	old INT 08h vector
+h	DWORD	old INT 09h vector
+Ah	DWORD	address INT 16h routine used by MDEBUG
+Eh	BYTE	length of version string
+Fh  N BYTEs	version string
+==== INT 60 - MDEBUG - GET ADDRESS OF THE HELP REGISTERS ====
+	AH = 01h
+	DS:SI -> password or a null byte
+Return: AX = return code
+	    FFFEh password is invalid
+	    FFFDh display mode is invalid
+	   else successful
+		ES:DI point to the help registers of MDEBUG
+	       ES:DI-02h  -> R0 (WORD)
+	       ES:DI	  -> R1 (WORD)
+	       ES:DI+02h  -> R2 (WORD)
+	       ES:DI+04h  -> R3 (WORD)
+	       ...
+	       ES:DI+0Eh  -> R8 (WORD)
+==== INT 60 - SYS_PROF.EXE - TURN PROFILING OFF ====
+	AH = 01h
+Note:	SYS_PROF.EXE is the TSR portion of a profiler from Micro Cornucopia #47
+SeeAlso: AH=00h"SYS_PROF",02h"SYS_PROF"
+==== INT 60 - FTP Packet Driver - BASIC FUNC - GET DRIVER INFO ====
+	AX = 01FFh
+	BX = handle returned by function 02h
+Return: CF set on error
+	    DH = error code (see below)
+	CF clear if successful
+	    BX = version
+	    CH = network interface class (see below)
+	    DX = interface type (see below)
+	    CL = number
+	    DS:SI -> name
+	    AL = driver functions supported
+h basic
+h basic and extended
+h basic and high-performance
+h basic, high-performance, and extended
+		FFh not installed
+Note:	the handle in BX is optional for drivers written to v1.07 or later of
+	  the packet driver specification
+Values for error code:
+h "BAD_HANDLE"	invalid handle number
+h "NO_CLASS"		no interfaces of the specified class found
+h "NO_TYPE"		no interfaces of the specified type found
+h "NO_NUMBER"	no interfaces of the specified number found
+h "BAD_TYPE"		bad packet type
+h "NO_MULTICAST"	interface does not support multicast messages
+h "CANT_TERMINATE"	this packet driver cannot terminate
+h "BAD_MODE"		invalid receiver mode
+h "NO_SPACE"		insufficient space
+Ah "TYPE_INUSE"	type accessed but never released
+Bh "BAD_COMMAND"	bad command
+Ch "CANT_SEND"	packet could not be sent
+Dh "CANT_SET"		hardware address could not be changed
+Eh "BAD_ADDRESS"	hardware address has a bad length or format
+Fh "CANT_RESET"	could not reset interface
+Values for Network Interface classes/types:
+    Class 01h  Ethernet/IEEE 802.3
+h 3COM 3C500/3C501
+h 3COM 3C505
+h MICOM-Interlan NI5010
+h BICC Data Networks 4110
+h BICC Data Networks 4117
+h MICOM-Interlan NP600
+h Ungermann-Bass PC-NIC
+h Univation NC-516
+Ah TRW PC-2000
+Bh MICOM-Interlan NI5210
+Ch 3COM 3C503
+Dh 3COM 3C523
+Eh Western Digital WD8003
+Fh Spider Systems S4
+h Torus Frame Level
+h 10Net Communications
+h Gateway PC-bus
+h Gateway AT-bus
+h Gateway MCA-bus
+h IMC PCnic
+h IMC PCnic II
+h IMC PCnic 8-bit
+h Tigan Communications
+h Micromatic Research
+Ah Clarkson "Multiplexor"
+Bh D-Link 8-bit
+Ch D-Link 16-bit
+Dh D-Link PS/2
+Eh Research Machines 8
+Fh Research Machines 16
+h Research Machines MCA
+h Radix Microsystems EXM1 16-bit
+h Interlan Ni9210
+h Interlan Ni6510
+h Vestra LANMASTER 16-bit
+h Vestra LANMASTER 8-bit
+h Allied Telesis PC/XT/AT
+h Allied Telesis NEC PC-98
+h Allied Telesis Fujitsu FMR
+h Ungermann-Bass NIC/PS2
+Ah Tiara LANCard/E AT
+Bh Tiara LANCard/E MC
+Ch Tiara LANCard/E TP
+Dh Spider Communications SpiderComm 8
+Eh Spider Communications SpiderComm 16
+Fh AT&T Starlan NAU
+h AT&T Starlan-10 NAU
+h AT&T Ethernet NAU
+h Intel smart card
+h Xircom Packet Adapter
+h Aquila Ethernet
+h Novell NE1000
+h Novell NE2000
+h SMC PC-510
+h AT&T Fiber NAU
+h NDIS to Packet Driver adapter
+Ah Racal-InterLan ES3210
+Bh General Systems ISDN simulated Ethernet
+Ch Hewlett-Packard
+Dh IMC EtherNic-8
+Eh IMC EtherNic-16
+Fh IMC EtherNic-MCA
+h NetWorth EtherNext
+h Dataco Scanet
+h DEC DEPCA
+h C-Net
+h Gandalf LANLine
+h Apricot built-in
+h David Systems Ether-T
+h ODI to Packet Driver adapter
+h AMD Am21110-16
+h Intel ICD Network controller family
+Ah Intel ICD PCL2
+Bh Intel ICD PCL2A
+Ch AT&T LANPacer
+Dh AT&T LANPacer+
+Eh AT&T EVB
+Fh AT&T StarStation
+h SLIP simulated ethernet
+h Racal-Interlan NIA310
+h Racal-Interlan NISE
+h Racal-Interlan NISE30
+h Racal-Interlan NI6610
+h Ethernet over IP/UDP
+    Class 02h  ProNET-10
+h Proteon p1300
+h Proteon p1800
+    Class 03h  IEEE 802.5/ProNet-4
+h IBM Token-Ring Adapter
+h Proteon p1340
+h Proteon p1344
+h Gateway PC-bus
+h Gateway AT-bus
+h Gateway MCA-bus
+h NDIS to Packet Driver adapter
+h ODI to Packet Driver adapter
+    Class 04h  Omninet
+    Class 05h  Appletalk
+h ATALK.SYS adapter
+    Class 06h  Serial Line
+h Clarkson 8250-SLIP
+h Clarkson "Multiplexor"
+    Class 07h  StarLAN (subsumed by Ethernet class)
+    Class 08h  ARCnet
+h Datapoint RIM
+    Class 09h  AX.25
+h Ottawa PI card
+    Class 0Ah  KISS
+    Class 0Bh  IEEE 802.3 with 802.2 headers
+	types same as for class 01h
+    Class 0Ch  FDDI with 802.2 headers
+h Western Digital
+h Frontier Technology
+    Class 0Dh  Internet X.25
+h Western Digital
+h Frontier Technology
+    Class 0Eh  N.T. LANSTAR (encapsulating DIX Ethernet)
+h NT LANSTAR/8
+h NT LANSTAR/MC
+    Class 0Fh  SLFP (MIT serial specification)
+h MERIT
+    Class 10h  PPP (Point-to-Point Protocol)
+Note: class and type numbers are cleared through FTP Software
+==== INT 60 - MDEBUG - SET STATUS ====
+	AH = 02h
+	DS:SI -> password or a null byte
+	ES = new value for the register SE
+	DI = new value for the register OF
+	CH = new monitor color if nonzero
+	CL = new interpreter color if nonzero
+	BH = new monitor start line if nonzero
+	BL = new interpreter start line if nonzero
+	AL = new ASCII code for the hotkey ('A'..'Z', 'a'..'z') if nonzero
+	DL = new status of the special keys (SHIFT, ALT, CTRL) for the hotkey
+	    if nonzero
+	DH = if nonzero, new basic process number for communication with the
+	    drivers (DH = multiplex number for the display driver,
+	    DH+1 = multiplex number for the command driver or drivers)
+Return: AX = return code
+	    FFFFh call not allowed
+	    FFFEh password is invalid
+	    FFFDh display mode is invalid
+h successful, status changed
+	   else AL = error code
+		    bit 0 invalid monitor start line
+invalid interpreter start line
+invalid hotkey
+invalid process number
+-7 reserved
+Note:	the values of the registers SE and OF are always changed, the other
+	  values are only changed if they are valid
+SeeAlso: AH=00h"MDEBUG"
+==== INT 60 - FTP Packet Driver - BASIC FUNC - ACCESS TYPE ====
+	AH = 02h
+	AL = interface class
+	BX = interface type
+	DL = interface number
+	DS:SI -> type
+	CX = length of type (0000h for all packets)
+	ES:DI -> receiver
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+	    AX = handle
+SeeAlso: AH=03h"FTP"
+Receiver is called with:
+	AX = subfunction
+h get packet buffer
+		DX = lookahead length (v1.10+)
+		DS:SI -> lookahead buffer if DX nonzero (v1.10+)
+		DI = error flags (class dependent) (v1.10+)
+		Return: ES:DI -> packet buffer
+h:0000h means throw away packet
+			CX = size of buffer (v1.10+), may be smaller than
+				incoming data
+h copy completed
+		DS:SI -> buffer
+		CX = bytes actually copied (v1.10+)
+	BX = handle
+	CX = buffer length
+when a packet is received
+==== INT 60 - SYS_PROF.EXE - TURN PROFILING ON ====
+	AH = 02h
+Note:	SYS_PROF.EXE is the TSR portion of a profiler from Micro Cornucopia #47
+SeeAlso: AH=00h"SYS_PROF",01h"SYS_PROF"
+==== INT 60 - MDEBUG - POP UP ====
+	AH = 03h
+	DS:SI -> password or a null byte
+	ES -> new value for the register SE
+	DI -> new value for the register OF
+Return: AX = return code
+	    FFFFh call not allowed
+	    FFFEh password is invalid
+	    FFFDh display mode is invalid
+	   else successful
+SeeAlso: AH=04h"MDEBUG"
+==== INT 60 - FTP Packet Driver - BASIC FUNC - RELEASE TYPE ====
+	AH = 03h
+	BX = handle
+Return: CF set on error
+	   DH = error code (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=02h"FTP"
+==== INT 60 - SYS_PROF.EXE - GET ADDRESS OF PROFILING TABLE ====
+	AH = 03h
+Return: ES:BX -> profiling table
+Note:	SYS_PROF.EXE is the TSR portion of a profiler from Micro Cornucopia #47
+SeeAlso: AH=04h"SYS_PROF"
+==== INT 60 - FTP Packet Driver - BASIC FUNC - SEND PACKET ====
+	AH = 04h
+	DS:SI -> buffer
+	CX = length
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+Note:	the buffer may be modified immediately upon return from this call
+SeeAlso: AH=0Bh
+==== INT 60 - MDEBUG - POP UP ====
+	AH = 04h
+	DS:SI -> password or a null byte
+Return: AX = return code
+	    FFFFh call not allowed
+	    FFFEh password is invalid
+	    FFFDh display mode is invalid
+	   else successful
+SeeAlso: AH=03h"MDEBUG",AH=07h"MDEBUG"
+==== INT 60 - SYS_PROF.EXE - CLEAR PROFILING TABLE ====
+	AH = 04h
+Note:	SYS_PROF.EXE is the TSR portion of a profiler from Micro Cornucopia #47
+SeeAlso: AH=03h"SYS_PROF"
+==== INT 60 - FTP Packet Driver - BASIC FUNC - TERMINATE DRIVER FOR HANDLE ====
+	AH = 05h
+	BX = handle (optional for v1.10+)
+Return: CF set on error
+	   DH = error code (see AX=01FFh)
+	CF clear if successful
+==== INT 60 - MDEBUG - GET AND SET MDEBUG FLAGS ====
+	AH = 05h
+	DS:SI -> password or a null byte
+	BL = new value for the semaphor of MDEBUG
+h  enable popup of MDEBUG
+	     else disable popup of MDEBUG
+Return: AX = return code
+	    FFFEh password is invalid
+	    FFFDh display mode is invalid
+	   else successful
+		BL = old value of the semapor of MDEBUG
+		BH = old value of the INT 08h semaphor
+		    (this semaphor is always reset after this function)
+==== INT 60 - FTP Packet Driver - BASIC FUNC - GET ADDRESS ====
+	AH = 06h
+	BX = handle (optional for v1.10+)
+	ES:DI -> buffer
+	CX = length
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+	    CX = length
+Note:	copies the local net address associated with the handle into the buffer
+==== INT 60 - MDEBUG - GET PASSWORD STATUS ====
+	AH = 06h
+Return: AL = status
+h password inactive
+h password active
+==== INT 60 - FTP Packet Driver - BASIC FUNC - RESET INTERFACE ====
+	AH = 07h
+	BX = handle (optional for v1.10+)
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+==== INT 60 - MDEBUG v1.70+ - GET ACTIVE PART OF MDEBUG ====
+	AH = 07h
+Return: AL = active part for the next popup session of MDEBUG:
+	    bit 0: the next popup session will start in the interpreter rather
+	     		than in the monitor
+	    bit 1: the next popup session will sart in the online-help
+SeeAlso: AH=03h"MDEBUG",AH=04h"MDEBUG"
+==== INT 60 - MDEBUG - UNUSED ====
+	AH = 08h-FFh
+Return: AX = FFFCh
+==== INT 60 - FTP Packet Driver 1.09+ - HIGH-PERF FUNC - GET PARAMETERS ====
+	AH = 0Ah
+Return: CF set on error
+	    DH = error code (0Bh) (see AX=01FFh)
+	CF clear if successful
+	    ES:DI -> parameter table (see below)
+Format of parameter table:
+Offset	Size	Description
+h	BYTE	major revision of packet driver spec driver conforms to
+h	BYTE	minor revision of packet driver spec
+h	BYTE	length of this structure in bytes
+h	BYTE	length of a MAC-layer address
+h	WORD	maximum transfer unit, including MAC headers
+h	WORD	buffer size for multicast addr
+h	WORD	number of receive buffers (one less than back-to-back MTU rcvs)
+Ah	WORD	number of transmit buffers
+Ch	WORD	interrupt number to hook for post-EOI processing, 00h=none
+==== INT 60 - FTP Packet Driver 1.09 - HIGH-PERF FUNC - ASYNCHRONOUS SEND PACKET ====
+	AH = 0Bh
+	DS:SI -> buffer
+	CX = length of buffer
+	ES:DI -> FAR function to call when buffer becomes available
+Return: CF set on error
+	    DH = error code (0Bh,0Ch) (see AX=01FFh)
+	CF clear if successful
+Notes:	unlike function 04h, the buffer is not available for modification as
+	  soon as the call returns; the buffer may be queued by the driver and
+	  not processed until later
+	this function has been dropped from v1.10+ of the specification and
+	  replaced by function 0Ch
+SeeAlso: AH=04h"Packet Driver",AH=0Ch"Packet Driver"
+Completion function called with:
+	AX = result
+h copy OK
+	    nonzero error
+	ES:DI -> buffer passed to INT 60/AH=0Bh call
+==== INT 60 - FTP Packet Driver 1.10+ - HIGH-PERF FUNC - ASYNCHRONOUS SEND PACKET ====
+	AH = 0Ch
+	ES:DI -> pointer to IOCB
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=04h"Packet Driver",AH=09h"Packet Driver"
+Format of IOCB:
+Offset	Size	Description
+h	DWORD	pointer to buffer
+h	WORD	length of buffer
+h	BYTE	flags
+		bit 0: packet driver is finished with IOCB
+		bit 1: application requests upcall when driver completes
+h	DWORD	function address for upcall
+Bh  4 BYTEs	future gather write
+Fh	BYTE	???
+h  8 BYTEs	private driver workspace
+Completion function called with:
+	ES:DI -> IOCB passed to INT 60/AH=0Ch
+==== INT 60 - Banyan VINES, 3com - GET STATION ADDRESS ====
+	AH = 0Ch
+Return: AL = status
+h successful
+		ES:SI -> 6-byte station address
+h semaphore service is unavailable
+==== INT 60 - FTP Packet Driver 1.10+ - HIGH-PERF FUNC - DROP PACKET FROM QUEUE ====
+	AH = 0Dh
+	ES:DI -> IOCB
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=0Ch"Packet Driver"
+==== INT 60 - 3com, 10-NET, Banyan VINES - LOCK AND WAIT ====
+	AH = 11h
+	AL = drive number or 0
+	DX = number of seconds to wait
+	ES:SI = Ethernet address or 0
+	DS:BX -> 31-byte ASCIZ semaphore name
+Return: AL = status
+h successful
+h timeout
+h server not responding
+h invalid semaphore name
+h semaphore list is full
+h invalid drive ID
+h invalid Ethernet address
+h not logged in
+h write to network failed
+h semaphore already logged for this CPU
+SeeAlso: AH=12h,AH=13h
+==== INT 60 - 3com, 10-NET, Banyan VINES - LOCK ====
+	AH = 12h
+	AL = drive number or 00h
+	ES:SI = Ethernet address or 0000h:0000h
+	DS:BX -> 31-byte ASCIZ semaphore name
+Return: AL = status (see also AH=11h)
+h semaphore currently locked by another PC
+Note:	unlike function 11h, this function returns immediately
+SeeAlso: AH=11h,AH=13h
+==== INT 60 - 3com, 10-NET, Banyan VINES - UNLOCK ====
+	AH = 13h
+	AL = drive number or 00h
+	ES:SI = Ethernet address or 0000h:0000h
+	DS:BX -> 31-byte ASCIZ semaphore name
+Return: AL = status (see also AH=11h)
+semaphore not locked
+SeeAlso: AH=11h,AH=12h
+==== INT 60 - FTP Packet Driver - EXTENDED FUNC - SET RECEIVE MODE ====
+	AH = 14h
+	BX = handle (optional for v1.10+)
+	CX = mode
+h turn off receiver
+h receive only packets sent to this interface
+h mode 2 plus broadcast packets
+h mode 3 plus limited multicast packets
+h mode 3 plus all multicast packets
+h all packets
+h raw mode for serial line only (v1.10+)
+Return: CF set on error
+	   DH = error code (01h,08h) (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=15h
+==== INT 60 - FTP Packet Driver - EXTENDED FUNC - GET RECEIVE MODE ====
+	AH = 15h
+	BX = handle (optional for v1.10+)
+Return: CF set on error
+	    DH = error code (01h) (see AX=01FFh)
+	CF clear if successful
+	    AX = mode
+SeeAlso: AH=14h
+==== INT 60 - FTP Packet Driver - EXTENDED FUNC - SET MULTICAST LIST ====
+	AH = 16h
+	ES:DI -> multicast list
+	CX = length of list in bytes
+Return: CF set on error
+	    DH = error code (06h,09h,0Eh) (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=17h
+==== INT 60 - FTP Packet Driver - EXTENDED FUNC - GET MULTICAST LIST ====
+	AH = 17h
+Return: CF set on error
+	    DH = error code (06h,09h) (see AX=01FFh)
+	CF clear if successful
+	    ES:DI -> multicast addresses (do not modify)
+	    CX = bytes of multicast addresses currently in use
+SeeAlso: AH=16h
+==== INT 60 - FTP Packet Driver - EXTENDED FUNC - GET STATISTICS ====
+	AH = 18h
+	BX = handle (optional for v1.10+)
+Return: CF set on error
+	    DH = error code (01h) (see AX=01FFh)
+	CF clear if successful
+	    DS:SI -> statistics (see below)
+Format of statistics:
+Offset	Size	Description
+h	DWORD	packets in
+h	DWORD	packets out
+h	DWORD	bytes in
+Ch	DWORD	bytes out
+h	DWORD	errors in
+h	DWORD	errors out
+h	DWORD	packets dropped
+==== INT 60 - FTP Packet Driver - EXTENDED FUNC - SET NETWORK ADDRESS ====
+	AH = 19h
+	ES:DI -> address
+	CX = length of address
+Return: CF set on error
+	    DH = error code (0Dh,0Eh) (see AX=01FFh)
+	CF clear if successful
+	    CX = length
+==== INT 60 - FTP Packet Driver v1.10+ - EXTENDED FUNC - SEND RAW BYTES ====
+	AH = 1Ah
+	DS:SI -> buffer
+	CX = length of buffer
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=1Ch
+==== INT 60 - FTP Packet Driver v1.10+ - EXTENDED FUNC - FLUSH RAW BYTES RECEIVED ====
+	AH = 1Bh
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+SeeAlso: AH=1Ch
+==== INT 60 - FTP Packet Driver v1.10+ - EXTENDED FUNC - FETCH RAW BYTES RECEIVED ====
+	AH = 1Ch
+	DS:SI -> buffer
+	CX = length of buffer
+	DX = timeout in clock ticks
+Return: CF set on error
+	    DH = error code (see AX=01FFh)
+	CF clear if successful
+	    CX = number of bytes transferred to buffer
+SeeAlso: AH=1Ah,AH=1Bh
+==== INT 60 - AccessDOS - API ====
+	AH = ADh
+	AL = function
+	    E1h ???
+		Return: AX = ???
+	    E2h get configuration
+		Return: BX:AX -> configuration data
+Notes:	AccessDOS is a public domain TSR developed at The Trace Research and
+	  Development Center which provides extensions for keyboard, mouse,
+	  and sound access by the visually, hearing, or motor-control
+	  impaired.
+	INT 60 is the default vector; AccessDOS will use the first 0000h:0000h
+	  vector in the range 60h through 66h.

Nox-Rhea WiKi

Outils pour utilisateurs

Outils du site

Différences

Outils de la page